Hand-held IP Mesh Wireless Video Transmitter

COFDM WIRELESS TX

COFDM Wireless Rx

FDD

IP Mesh

OEM

RF power amplifier and components

COFDM WIRELESS TX

Low Delay Light Wireless COFDM Video Transmitter SG-HD103

Portable Manpack Wireless Video Transmitter SG-R5000

Mini UAV/FPV COFDM Video Transmitter SG-S1000A

H.265 Multi-channel IP Video Transmitter

Long Distance UGV COFDM Video Transmitter SG-H5000B

COFDM WIRELESS TX

COFDM Drone/Vehicle AV Receiver DR2000

COFDM Wireless Ground Station With Flight Contrtol SG-HR103

Multi-channel COFDM Wireless Ground Station SG-SRT01

Handheld COFDM Receiver With Video Display

Standard HD COFDM Wirelss Video Receiver SG-HR50

COFDM WIRELESS TX

FDD 100W Duplex Wireless VideoTransceiver

FDD 30W Duplex Ethernet Video Transceiver For Vehicle/Vessel

FDD 5W Manpack Duplex Ethernet Ethernet Transceiver

FDD 2W Duplex Ethernet Video Transceiver For UAV/Robot

COFDM WIRELESS TX

Hand-held IP Mesh Wireless Video Transmitter

SG-MESH-3 Transmit In Building,UAV

SG-MS1400 Man-pack IP Mesh Wireless Video Transceiver

COFDM WIRELESS TX

Low-latency OEM Main Board

HD Mainboard SG-HBD02

COFDM 720P OEM MAIN BOARD

H.265 COFDM Mainboard

Ⅰ.Product Introduction

Hand-held IP mesh wireless video transceiver adopt COFDM modulation which could make full use of efficient spectrum resources. In the complex communication environment, it can realize the same frequency ad hoc network communication between the soldier, vehicle, UAV, mobile point and fixed point. All nodes can act as information collection node, relay node or information output node at the same time. It provides IP port and could realize interconnect with other IP device. Long distance transmission, small size, low power consumption, integrated design of battery and host which easy to carry are its advantages.

Ⅱ. Product Features:

1.Adopt our independently developed technologies COFDM waveform, efficient channel code and multi-hop ad hoc network protocol.
2. Do not rely on base stations. Able to form a centerless wireless broadband network efficiently and quickly.
3. Provide IP interface to realize interconnection and interworking with other IP devices.
4. Built-in a lithium battery to ensure that the device is powered for 4-5 hours.
5. Able to automatically select the best route. Self-organizing, Self-healing, and it can automatically implement network topology such as chain and star.

Ⅲ. Product Parameters

RF Features
Frequency Range	225MHz~1.5GHz（Customizable）
RF Power	100MW or 1W
Modulation	COFDM
Constellation modulation	BPSK/QPSK/16QAM/64QAM（Adaptive）
FEC	1/2，2/3，3/4，5/6（Optional）
Sensitivity	-93dBm@5MHz
Transmission Rate	Peak 11MBPS@10MHZ
Transmission Distance	8KM（100MW/LOS）
Networking Capacity	16 Nodes
Electric Features
Working Voltage	DC12V
Working Current	1A(Typical Value)
Power Consumption	≤9W@100mW Tx Power； ≤15W@1W Tx Power
Data Features
Video Input Format	Support IP Video Input
Audio Input Format	MIC/PTT
Encryption	AES128 or User Defined
Built-in Module	Wi-Fi/Bluetooth/GPS/Beidou
Physical Features
Protection Grade	IP66
Working Temperature	-20℃ ~ +55℃
Storage Temperature	-50℃ ~ +70℃
Dimension	1807440mm(100mW)
Dimension	2157040mm(1W)
Weight	About 500g(without battary)