5W & 10W Power Amplifier


Item Technical Parameters
Work Frequency 1433-1483MHz
Work Bandwidth 50MHz
Output Power 37/40±1dBm
Gain 45±1dB
Gain Adjustment Range ≥20dB
Gain Adjustment Step 1dB
Gain Adjustment Error ≤±1.5dB
In-band Fluctuation ≤2.0dB
ACPR ≤-40dBc
Error Vector Magnitude
(EVM)
≤3%
Out-of-band Spurious 9kHz~1GHz:≤-36dBm/30kHz
1GHz~12.75GHz:≤30dBm/30KHz
Anti-bumout Of Amplifier Output Port  
 
Under rated power output and ouput ports open status in TTD working mode, it would not damage the module and the indicator would not get worse within 10 minutes continuous work.
 
I/O Standing Wave Ratio ≤1.5
Work Frequency 1433-1483MHz
Gain 20±1dB
Gain Adjustment Range ≥20dB
Gain Adjustment Step 1dB
Gain Adjustment Error ≤±1dB
In-band Fluctuation ≤2.0dB
Noise Figure ≤3.5dB
I/O Standing Wave Ratio ≤1.5
Max input undamaged level 0dBm
Work Voltage DC+28V
Work Current ≤2.0A/2.8A
Amplifier Power Supply RF Response
(Power Amplifier on / off, LNA on / off)
1. Rising Edge+ Rising Edge Delay: ≤2.5us;(Rising time: from 10% of the max to 90% of the max;)
2. Falling Edge+ Falling Edge Delay: ≤2.5us; (Falling time: from 90% of the max to 10% of the max)
Work Temperature -25~+55℃
Relative Humidity(RH) 5%~95%,non-condensing
Storage Temperature -40~+65℃

COFDM Transmitter

COFDM Transmitter

COFDM Receiver

FDD IP Transceiver

IP MESH Radio

OEM Board

COFDM Transmitter

COFDM Transmitter

COFDM Transmitter

COFDM Transmitter

COFDM Transmitter